Skip to content

How to achieve continuous fire yourself with pellet stove – How to improve the heat output of your heater.

To optimize continuous combustion by increased heat production when using the pellet stove, you have a few options. These provide an efficient and environmentally friendly way to heat your home, even if the climate is rarely exposed to extreme weather conditions. In addition, maintaining a consistent temperature increases comfort and efficiency. Pellet stoves are most economical when matched to the living space and properly adjusted. Here are some useful information and tips that can help you save on heating costs during the winter season.

Enable continuous burning through more heat from pellet stove

increase the burning time of the pellet stove in winter through optimal use and quality solid fuels

Pellet stoves are a popular choice these days when it comes to supplementing central air conditioning systems. Unlike traditional wood-burning fireplaces, they function more like a furnace and can help save on utility costs. But how do you get a pellet stove to burn hotter? First and foremost, when adjusting the heat output of a pellet stove, consider the outside temperature, home size, floor plan, drafts and insulation, or home insulation . In fact, minor adjustments can result in significant improvements in heat output. Determining the optimal settings for your home and specific weather conditions may require patience, but will allow you to get the most heat out of your pellet stove.

enable continuous burning in a room loaded with wood pellets with pellet stove

In addition, the heat output of a pellet stove can be reduced when the combustion chamber is full of ash and the fans are dirty. Cleaning the pellet stove at least once a week will allow for better airflow, which is necessary to generate the most heat. Using a special vacuum cleaner for pellet stove in this case is one of the best cleaning methods. However, if you do not have one, you can simply remove the ash from the stove by sweeping it with a brush. Most manufacturers recommend thorough cleaning after burning each load of wood pellets in the stove. At least once a year, completely disassemble the heater and perform pellet stove maintenance, including cleaning the chimney, or have a professional do it for you.

Increase the speed of the fan

pellet stove fan and blower control to increase heat output in the winter season

In most pellet stoves, a fan introduces air into the fire. This should cause your stove’s flame to burn white-hot. A sluggish orange flame indicates that you need to increase the airflow to the fire, while a flame that is too high indicates that you need to decrease the airflow to the fire. Stoves also differ in the way the damper works. They either move in and out or from side to side to increase or decrease outside air intake. Adjust the damper on your unit accordingly until the flame is white-hot and about one-third the height of the combustion chamber for optimal holding of continuous fire in the pellet stove.

fill modern pellet stove with wood pellets and clean and maintain regularly after burning process

In addition, you can also increase the temperature of the pellet stove by increasing the fan speed. This increases the heat distribution of the wood pellets, which makes it easier for them to spread inside the stove. Accordingly, when the blowers move, the fan speed increases. As a result, the amount of heat emitted by the stove also increases. You can increase the fan level and the heating level at the same time, or simply increase the fan level. The fan speed settings may be located on the side of the pellet stove or on the digital control panel. Some modern stoves may also have an automatic feature that allows you to more easily control the blower for certain times of the day.

Use high quality pellets

selection of high quality wood pellets to improve heating performance and save on heating costs

The make and model of the stove play a big role in how hot the stove can burn. In addition, settings, pellets and special features of the stove can affect its heating temperature. Not all wood pellets are created equal, and quality can have a big impact on how much heat they can generate and extract from them. Lower quality pellets also tend to have higher moisture and ash content, making them harder to burn. As a result, they give off less heat than higher quality pellets. On the other hand, better quality wood pellets have lower moisture and ash content, which results in more heat than they can give off, allowing you to extend continuous burning in your pellet stove.

better burning due to higher quality wood pellets with low humidity

In addition, high-quality pellets are made of 100 percent wood and contain no fillers or bark. However, the materials used to make pellets vary widely from manufacturer to manufacturer. Unlike logs, pellets made from softer woods generally generate the most heat. Hotter burning wood pellets cost correspondingly more, but if you want to reduce consumption in the pellet stove, your home will thus stay warm longer. So pellets with low moisture content burn at higher levels and produce the most heat. This means that the pellets meet stricter quality guidelines, such as maximum ash and moisture content.

Enabling continuous combustion through optimal settings in the pellet stove

pellet stove equipped with a display and touchscreen improve endurance burning through optimal setting

Increasing the oxygen content in the pellet stove, for example, can also result in pellets that burn longer and hotter. Some models have a damper that can be manually controlled to adjust the airflow. Opening the damper results in a faster and hotter flame in a relatively short time. However, other models have an automatic airflow control button that allows you to instantly improve combustion in the blower. This results in faster heating than manually controlled dampers.

woman with pet enjoys the heat output of her pellet stove in the cold season and increases efficiency

When the weather outside gets colder or windier, it may be necessary to adjust the heat output and/or blower speed to keep your home at the desired temperature. These adjustments, as described, are individually controllable on most stoves either by a knob or an electronic knob. Experiment with your pellet stove until you find the best combination of heat output and airflow speed settings for different weather conditions. Then, if necessary, document the optimal control for future use. Experts recommend installing a small floor fan near the unit to blow heat around the room, rather than simply allowing the heat to rise to the ceiling.

Optimize the heating power of the pellet stove

adjust the air flow and burning of pellets to the living space increase continuous burning in a pellet stove

You can increase the burning temperature of the pellet stove by simply increasing the heat level on the stove. On most modern pellet stoves, you will find this setting on the control located on the side of the stove. Some stoves may have touch screen controls. You can also increase the temperature and other settings. Again, it may take a little experimentation to determine the best setting for the oven. The size of the room also plays a role in deciding which setting is best. Surprisingly, the highest setting is not always recommended for larger rooms.

  • Pellet stoves are highly automated heaters and control the rate at which the pellets are fed to the fire for optimal combustion efficiency and heat output.
  • The stove has a built-in room temperature sensor, allowing it to continuously read the current room temperature. This ensures that the pellet stove brings the corresponding room to the desired temperature and maintains it.
  • Therefore, to increase the heating power of your own pellet stove, you can simply adjust this temperature setting.
  • In order for you to generate more heat, your pellet stove should increase the airflow as well as the supply of pellets to the fire, which increases the maximum possible heat output for certain stove models. So if you want to increase the heat output of your pellet stove, you can increase the air flow, add more qualitative pellets or change the settings according to the above principles.